Loading
Home › Engineering Help › i need help with my fluid mechanics project. The Problem:...
Status: Completed

i need help with my fluid mechanics project. The Problem: The town of Kennerdell, Pennsylvania is growing. This small community along the Allegheny River is growing and needs a new water reservoir to supply drinking water to the town. You and your team of engineers have been called upon to design this structure. The Assumptions: Kennerdell is a real city north of Pittsburgh. It lies on the Allegheny River and is easily located using Google Maps or some similar software. The Reservoir needs to be located within a 30 mile radius of where the center of town is marked on the map with the pin. It should also be located no more than 1000 feet from the Allegheny River as you are going to fill the reservoir from the river. The town population has grown to 20,000 people. The reservoir should average 21 feet deep through the year (you can just assume that the entire structure is 21 deep) and it should never get below 15 feet deep. The reservoir should be 20 acres in surface area. There will be channel from the river to the reservoir that is 4 deep and 3 wide. There will be a motorized gate between the channel and the reservoir that will be used to fill the reservoir when it is running low. The Engineering Report Your engineering report should be submitted as a proposal to the Army corps of engineers who will be doing the construction of the reservoir. It should consist of at least the following items: A design report for the reservoir including: o Location of the reservoir o Recommended material for the construction of the reservoir o Detailed structural analysis of the channel and reservoir o Fill gate design including what sort of motor would be needed to power the gate and the forces involved in lifting it. o 3D model of the entire structure o Tentative schedule of how frequently the gate will need to be operated in order to keep the reservoir at its minimum depth. (Hint: Consider water consumption per capita, addition by rain and snowfall, losses due to evaporation) A cost analysis of the materials to construct the dam (ignore labor to prep the site and construct the dam, the Army works for free) An environmental impact study at the site of the dam

Date Posted: 17/10/2015
Category: Engineering
Due Date: 20/10/2015
Instruction
i need help with my fluid mechanics project. The project requirements is in the attachment.

I need a guaranteed work from an engineer.
Bidders
proffesoranncarrl 10 years, 11 months ago
Rated 9.76 earned 242948.42 around 9258 assignments.
hello. i want to this project for you
$150.00
  • kindly assign me this project and i will have everything done for you
    proffesoranncarrl | Oct 17, 2015, 05:50 AM
  • The assignment needs a lot of work and using some drawing program like autocad or solid work. Are you sure you can do it if so I want you to work on it and show me a preview to see if you are doing it correctly.
    User_7991 | Oct 17, 2015, 05:51 AM
  • yes i will do it for you with autocad. i will be sending you progress
    proffesoranncarrl | Oct 17, 2015, 05:53 AM
  • Your price is way too much my price is $150!
    User_7991 | Oct 17, 2015, 05:55 AM
  • that is according to how much i will do for this project. i am sure it requires a lot of work
    proffesoranncarrl | Oct 17, 2015, 05:57 AM
  • No thank you I'll wait for other bids
    User_7991 | Oct 17, 2015, 05:58 AM
  • what best are you offering?
    proffesoranncarrl | Oct 17, 2015, 05:59 AM
  • $150
    User_7991 | Oct 17, 2015, 05:59 AM
  • what about you make it $200
    proffesoranncarrl | Oct 17, 2015, 06:01 AM
  • After critically thinking about it, I have decided to accept your deal of $150. be assured you will be impressed by my work. kindly assign it to me know
    proffesoranncarrl | Oct 17, 2015, 07:04 AM
  • Okay start working on the assignment and show me preview if you did good I will assign you
    User_7991 | Oct 17, 2015, 18:56 PM
  • am sorry i would only start working on it when you assign it to me. i have done engineering assignments before and thus i request your trust in this one as well. Thank you
    proffesoranncarrl | Oct 17, 2015, 19:33 PM
  • I assigned the project to you. Please do everything as I asked and as it written in the instructions. If you plagiarism or did not do the assignment correctly and on time I will not release the money.
    User_7991 | Oct 17, 2015, 20:27 PM
  • trust me i am going to do my best
    proffesoranncarrl | Oct 18, 2015, 02:43 AM
  • I'll be waiting. By the way my dead line is 10/20/2015 on 6:00 p.m EDT so please make sure to finish on time.
    User_7991 | Oct 18, 2015, 07:24 AM
  • ok
    proffesoranncarrl | Oct 18, 2015, 08:49 AM
  • send me what have you done so far ! let my check it with my professor
    User_7991 | Oct 18, 2015, 20:20 PM
  • ok. let me do that in a while
    proffesoranncarrl | Oct 19, 2015, 01:58 AM
  • did you do so ?
    User_7991 | Oct 19, 2015, 06:15 AM
  • please check the progress
    proffesoranncarrl | Oct 19, 2015, 08:42 AM
  • WHERE IS THE DRAWING USING SOLID WORKS ?
    User_7991 | Oct 19, 2015, 16:55 PM
  • that is not the final report. i am yet to send you the complete paper
    proffesoranncarrl | Oct 19, 2015, 17:07 PM
  • ok send it to me with solid works and make it as APA style. I mean, citation for each sentence you wrote from source and reference page.
    User_7991 | Oct 19, 2015, 17:31 PM
  • hello. check out the paper
    proffesoranncarrl | Oct 20, 2015, 05:03 AM
  • I wish that you are kidding with me ? What is this ? I don't see any solid work 3D modeling? I see picture my from Internet or elsewhere
    User_7991 | Oct 20, 2015, 05:06 AM
  • i have uploaded two attachments
    proffesoranncarrl | Oct 20, 2015, 05:09 AM
  • What's these values huh ? A lot of zeros and shittttt !!! I don't see any solid works or AUTOCAD ! You have wasted my time
    User_7991 | Oct 20, 2015, 05:14 AM
  • let me check maybe i uploaded the wrong file
    proffesoranncarrl | Oct 20, 2015, 05:15 AM
  • i gonna rectify that
    proffesoranncarrl | Oct 20, 2015, 05:16 AM
  • let me know if it is right now
    proffesoranncarrl | Oct 20, 2015, 09:43 AM
  • only one file works which is the word others aren't. did you see these step on file I've attached at the beginning of this homework ?
    User_7991 | Oct 20, 2015, 12:35 PM
  • A design report for the reservoir including: Location of the reservoir Recommended material for the construction of the reservoir Detailed structural analysis of the channel and reservoir Fill gate design including what sort of motor would be needed to power the gate and the forces involved in lifting it. 3D model of the entire structure Tentative schedule of how frequently the gate will need to be operated in order to keep the reservoir at its minimum depth. (Hint: Consider water consumption per capita, addition by rain and snowfall, losses due to evaporation) A cost analysis of the materials to construct the dam (ignore labor to prep the site and construct the dam, the Army works for free) An environmental impact study at the site of the dam
    User_7991 | Oct 20, 2015, 12:36 PM
  • My dead line is in 2 hours, I gave you a lot of extra time please do the drawing and adjust the requirements you did wrong. Please do it fast otherwise I'm going to fail the project !
    User_7991 | Oct 20, 2015, 19:38 PM
  • let me do that
    proffesoranncarrl | Oct 20, 2015, 19:52 PM
  • Please do it fast because 6:01 the website will close and I can not upload it! Also for drawing use autocad or solid work as we agreed upon
    User_7991 | Oct 20, 2015, 19:59 PM
  • And the report is missing some of the points please do them all as it shown in the project requirements
    User_7991 | Oct 20, 2015, 20:02 PM
  • please check it now
    proffesoranncarrl | Oct 20, 2015, 22:26 PM
  • drawing file doesn't open at all , plus it is already late. so, I will lose point.
    User_7991 | Oct 20, 2015, 22:46 PM
  • can i upload it again
    proffesoranncarrl | Oct 20, 2015, 22:53 PM
  • what about now?
    proffesoranncarrl | Oct 20, 2015, 22:59 PM
  • please upload again and upload image as well
    User_7991 | Oct 20, 2015, 23:01 PM
  • check the second one i uploaded
    proffesoranncarrl | Oct 20, 2015, 23:08 PM
  • you upload it too late, I can't get anything for it now!! thanks for nothing you did not do most of the work I asked and the drawing is incorrect!
    User_7991 | Oct 20, 2015, 23:11 PM
  • what about the write up on the word document? was it right?
    proffesoranncarrl | Oct 20, 2015, 23:12 PM
  • the steps is incomplete you only did couple of them and that not what I asked!! We agreed that you do the full project with the drawing and you did not do it in the time I asked
    User_7991 | Oct 20, 2015, 23:16 PM
  • i have really spent a lot of time on this project and tried my level best to do some good work for you.
    proffesoranncarrl | Oct 20, 2015, 23:21 PM
  • But you did not!! from the start I asked you if you know the programs your going to use for the drawing and if you got all the steps in the project and you said yes but you did not know anything. Also I gave more than 12 extra hours but you still did not give it on the dead line
    User_7991 | Oct 20, 2015, 23:23 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}
 
 
simon 10 years, 11 months ago
Rated 7.63 earned 1728.00 around 49 assignments.
Hello I can work for you at that price and I will deliver quality homework on time
$180.00
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}
 
 
smasakari 10 years, 11 months ago
Rated 9.17 earned 25004.00 around 1007 assignments.
hi
$150.00
  • i have excellent skills in mechanics,i can help you please
    User_5293 | Oct 17, 2015, 17:22 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}