Loading
Home › General Help › Select one of the following problems from chapter 15: 56,...
Status: Completed
 View Work

Select one of the following problems from chapter 15: 56, 59, 64, 65 Create 3D drawing of the complete assembly Create 3D drawing of each individual component (except standard parts: screws, washer, nuts, springs). Create 1 assembly layout drawing. Create individual component layout drawings. Must include all dimensions with tolerance. One must have symmetric tolerances, one must have deviation tolerances, one must have limit tolerances, and another must have a mix of all 3. You can choose the type of tolerance for any other component drawing. Each component drawing must identify 3 locating datum (A, B, C) and at least 3 different GD&T callouts. Submit 1 dwg for the full assembly ONLY. Submit pdf documents for all drawing layouts (full assembly and individual components), one page or document per drawing layout. Correct layout template must be used.

Date Posted: 06/12/2016
Category: General
Due Date: 19/12/2016
Instruction
Create 3D drawing of the complete assembly

Create 3D drawing of each individual component (except standard parts: screws, washer, nuts, springs).

Create 1 assembly layout drawing.

Create individual component layout drawings. Must include all dimensions with tolerance. One must have symmetric tolerances, one must have deviation tolerances, one must have limit tolerances, and another must have a mix of all 3. You can choose the type of tolerance for any other component drawing.

Each component drawing must identify 3 locating datum (A, B, C) and at least 3 different GD&T callouts.

Submit 1 dwg for the full assembly ONLY. Submit pdf documents for all drawing layouts (full assembly and individual components), one page or document per drawing layout.

Correct layout template must be used.
Attached
Download File 1 (JPG)
Download File 2 (JPG)
Download File 3 (JPG)
Download File 4 (JPG)
Tutor Uploads
Download File 1 (zip)
Download File 2 (dwg)
Download File 3 (dwg)
Download File 4 (dwg)
Bidders
WBURO 10 years, 3 months ago
Rated 9.25 earned 75605.06 around 2167 assignments.
Hello, I assure to provide quality work that is free from plagiarism and in time, kindly consider my bid..
$300.00
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[0] $}

{$ showNewChatSuccessMsg[0] $}
Unable to send Message: {$ showChatProcessErrorMsg[0] $}
 
 
1stclasshonour 10 years, 3 months ago
Rated 9.22 earned 30856.96 around 773 assignments.
hi
$150.00
  • Hello, $150 And are you familiar with Autocad ? Thanks
    User_10923 | Jun 12, 2016, 07:06 AM
  • this is my area of specialization ,,, doing masters in electrical engineering
    User_10376 | Jun 12, 2016, 07:12 AM
  • bid lowered
    User_10376 | Jun 12, 2016, 07:13 AM
  • Perfect! If you could please lower it to $150 because thats all i got. Thanks
    User_10923 | Jun 12, 2016, 07:13 AM
  • bid lowered
    User_10376 | Jun 12, 2016, 07:15 AM
  • thanks a lot for assigning me
    User_10376 | Jun 12, 2016, 07:17 AM
  • Thank you! I uploaded the other picture! Thanks again.
    User_10923 | Jun 12, 2016, 07:18 AM
  • noted ,, thanks alot will be done soon ,, perfectly done
    User_10376 | Jun 12, 2016, 07:24 AM
  • hello , i forgot to ask ,, in which format do you want ,,, PDF or just drawing
    User_10376 | Jun 12, 2016, 15:23 PM
  • also there are some part which are not clear...the dimensions are not clear on those photos . kindly take clear photos
    User_10376 | Jun 12, 2016, 17:56 PM
  • Hi, Sorry about the late reply If you haven't started yet i posted a new drawing instead of the first. its more clear and easier than the first one. As for the format , 1 dwg for the full assembly ONLY. PDF documents for all drawing layouts (full assembly and individual components), one page or document per drawing layout. Thanks
    User_10923 | Jul 12, 2016, 00:45 AM
  • thanks
    User_10376 | Jul 12, 2016, 00:46 AM
  • will be done with the assignment in the next 24 hours ,,hopes you will be online
    User_10376 | Jul 12, 2016, 01:02 AM
  • Perfect. Thanks A lot
    User_10923 | Jul 12, 2016, 01:12 AM
  • yes , have my word
    User_10376 | Jul 12, 2016, 01:13 AM
  • work done , KINDLY RELEASE THE PAYMENT AND LEAVE A POSITIVE FEEDBACK
    User_10376 | Jul 12, 2016, 18:34 PM
  • i promised you perfect work ,,have a look at it
    User_10376 | Jul 12, 2016, 18:37 PM
  • That is perfect. Thank you so much. Saved my life. I released the payment.
    User_10923 | Jul 12, 2016, 21:43 PM
  • Some of the stuff are missing such as the layouts and tolerance.
    User_10923 | Jul 12, 2016, 22:56 PM
  • hello . let me fix it and get back to you
    User_10376 | Aug 12, 2016, 01:28 AM
  • Hey, again thanks a lot its looks great but its missing this part to be exact Create individual component layout drawings. Must include all dimensions with tolerance. One must have symmetric tolerances, one must have deviation tolerances, one must have limit tolerances, and another must have a mix of all 3. You can choose the type of tolerance for any other component drawing. Each component drawing must identify 3 locating datum (A, B, C) and at least 3 different GD&T callouts.
    User_10923 | Aug 12, 2016, 01:31 AM
  • dont worry , will fix it and get back to you . am humbled working together
    User_10376 | Aug 12, 2016, 01:33 AM
  • Hey, Any update about the homework? Thanks
    User_10923 | Sep 12, 2016, 04:38 AM
  • hello my friends , kindly check the last two files . thanks
    User_10376 | Oct 12, 2016, 09:57 AM
  • Hi, I tried both files they don't work. Thanks
    User_10923 | Oct 12, 2016, 09:58 AM
  • what do you mean my friend ,,, they cant open
    User_10376 | Oct 12, 2016, 13:55 PM
  • Yes. When i click it, it opens another page with a lot of words.
    User_10923 | Oct 12, 2016, 18:48 PM
  • could you please upload the files again. Thanks
    User_10923 | Oct 12, 2016, 18:50 PM
  • Hi, there should be a pdf files for the layout with the tolerance and all the gd&t and all the other info please make sure to follow the instructions. Create INDIVIDUAL component LAYOUT drawings. MUST include all dimensions with TOLERANCE. One must have symmetric tolerances, one must have deviation tolerances, one must have limit tolerances, and another must have a mix of all 3. You can choose the type of tolerance for any other component drawing. EACH component drawing MUST identify 3 locating datum (A, B, C) and at least 3 different GD&T callouts. Thanks.
    User_10923 | Nov 12, 2016, 00:58 AM
  • Submit 1 dwg for the full assembly ONLY. Submit pdf documents for all drawing layouts (full assembly and individual components), one page or document per drawing layout.
    User_10923 | Nov 12, 2016, 01:00 AM
  • noted , will get back to you
    User_10376 | Nov 12, 2016, 01:08 AM
  • Thanks
    User_10923 | Nov 12, 2016, 01:13 AM
  • Hi, any updates on the homework? Just want to make sure because there is not a lot of time left for the due date. Thanks
    User_10923 | Dec 12, 2016, 20:05 PM
  • hello check the last file please
    User_10376 | Dec 12, 2016, 20:25 PM
  • bro can see the file have the same error ... since am not allowed to share personal details ,, kindly write to the support so that they can allow you to give me your email i send you directly
    User_10376 | Dec 12, 2016, 20:27 PM
  • Hi, Can i send my email in here ?
    User_10923 | Dec 12, 2016, 20:31 PM
  • unless you inform the support please so that i can send you directly
    User_10376 | Dec 12, 2016, 20:33 PM
  • ??
    User_10376 | Dec 12, 2016, 20:42 PM
  • i sent a message to the support about the matter. I'm waiting for a reply
    User_10923 | Dec 12, 2016, 21:05 PM
  • Ok its (kcrumbaa) and use the g ml domain
    User_10923 | Dec 12, 2016, 21:24 PM
  • Did you get it ?
    User_10923 | Dec 12, 2016, 21:32 PM
  • hello , am so dissapoited after taking my time and helping you claim back your money ... can imagine this ,, but rest assured you will pay for it ..
    User_10376 | Jan 30, 2017, 10:28 AM
  • hello dear client , do you have any assignment ??
    User_10376 | Feb 13, 2017, 22:35 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[1] $}

{$ showNewChatSuccessMsg[1] $}
Unable to send Message: {$ showChatProcessErrorMsg[1] $}