Loading
Home › Computer Science Help › I have written some code that is not entirely correct. I ...
Status: Completed
 View Work
I have written some code that is not entirely correct. I need someone to take a lot at it and fix it so that I get the correct output. I have uploaded a txt file containing my code.
Date Posted: 24/02/2021
Category: Computer Science
Due Date: 26/02/2021
Instruction
Attached
Download File 1 (txt)
Download File 2 (pdf)
Download File 3 (png)
Download File 4 (s)
Tutor Uploads
Download File 1 (s)
Download File 2 (jpg)
Download File 3 (jpg)
Download File 4 (jpg)
Download File 5 (jpg)
Bidders
smartestwriter 5 years ago
Rated 9.54 earned 25983.04 around 898 assignments.
Hello friend, I promise the best. Kindly allow me to help you. Thank you
$155.00
  • Hi, will you be able to help me? I need this done by Friday morning
    User_35055 | Feb 24, 2021, 17:48 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[0] $}

{$ showNewChatSuccessMsg[0] $}
Unable to send Message: {$ showChatProcessErrorMsg[0] $}
 
 
kingz 5 years ago
Rated 9.4 earned 52183.12 around 1434 assignments.
Hello kindly assign this to me i can guarantee timely and an A grade work
$2000.00
  • Hi, will you be able to help me? I need this done by Friday morning
    User_35055 | Feb 24, 2021, 18:32 PM
  • Yes
    kingz | Feb 24, 2021, 18:32 PM
  • $2000 is a lot though
    User_35055 | Feb 24, 2021, 18:36 PM
  • okey I am checking the language..which one is it?
    kingz | Feb 24, 2021, 18:37 PM
  • MIPS
    User_35055 | Feb 24, 2021, 18:40 PM
  • I am not good in that 1
    kingz | Feb 24, 2021, 18:44 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[1] $}

{$ showNewChatSuccessMsg[1] $}
Unable to send Message: {$ showChatProcessErrorMsg[1] $}
 
 
superbwriter 5 years ago
Rated 8.96 earned 12951.63 around 482 assignments.
will you pay 200$??
$200.00
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[2] $}

{$ showNewChatSuccessMsg[2] $}
Unable to send Message: {$ showChatProcessErrorMsg[2] $}
 
 
flavian77 5 years ago
Rated 9.66 earned 16836.53 around 543 assignments.
I am known for quality, timeliness, and originality. Talk to me about your order, and I will deliver within the deadline.
$55.00
  • Hi, will you be able to help me? I need this done by Friday morning
    User_35055 | Feb 24, 2021, 18:31 PM
  • sure I will be able to submit it back before your deadline
    flavian77 | Feb 24, 2021, 18:33 PM
  • Hello, I have gone through and I can do all the amendments that are required.
    flavian77 | Feb 24, 2021, 18:35 PM
  • I will take the shortest time possible to give it back
    flavian77 | Feb 24, 2021, 18:36 PM
  • $100 is too much though. Can you lower the price. I have already written all the code so you only need to fix the errors. Please understand I am a student and so I dont have so much money
    User_35055 | Feb 24, 2021, 18:37 PM
  • sure I understand my client, hope that will work for you
    flavian77 | Feb 24, 2021, 18:38 PM
  • And also let me know in case there are more instructions
    flavian77 | Feb 24, 2021, 18:39 PM
  • Hello client
    flavian77 | Feb 24, 2021, 18:45 PM
  • Will you be able to do it for $50? Please
    User_35055 | Feb 24, 2021, 19:07 PM
  • kindly adjust your price, we be fair
    flavian77 | Feb 24, 2021, 19:11 PM
  • hello
    flavian77 | Feb 24, 2021, 19:18 PM
  • are you there
    flavian77 | Feb 24, 2021, 19:21 PM
  • okay, $55 is my final offer?
    User_35055 | Feb 24, 2021, 19:21 PM
  • okay let me , update then
    flavian77 | Feb 24, 2021, 19:24 PM
  • let me know, what were the instructions before coming up with the code
    flavian77 | Feb 24, 2021, 19:25 PM
  • and then let me know the timeline, how long do I have to do the task?
    flavian77 | Feb 24, 2021, 19:28 PM
  • I need this completed by friday morning. Once I assign the task to you, I can upload a picture with the instructions
    User_35055 | Feb 24, 2021, 19:29 PM
  • please do
    flavian77 | Feb 24, 2021, 19:29 PM
  • can you update the offer so that I can assign it to you
    User_35055 | Feb 24, 2021, 19:30 PM
  • upload the pic, as I change the bid, we get to work
    flavian77 | Feb 24, 2021, 19:31 PM
  • I have already
    flavian77 | Feb 24, 2021, 19:35 PM
  • go ahead and assign the task
    flavian77 | Feb 24, 2021, 19:35 PM
  • hello, I have, already, am waiting for you to assign and attach the instructions
    flavian77 | Feb 24, 2021, 19:41 PM
  • thank you, you haven't uploaded the instructions
    flavian77 | Feb 24, 2021, 19:58 PM
  • Hi, sorry for the delay I was in a meeting. I have attached two documents - one is a txt file with my code and one is a pdf with the instructions (I need help with question 6 ONLY). Feel free to rewrite code if you think that would be easier, or use my existing code to make changes.
    User_35055 | Feb 24, 2021, 19:58 PM
  • I have now, thank you, I will update you once am done
    flavian77 | Feb 24, 2021, 19:59 PM
  • thank you so much
    User_35055 | Feb 24, 2021, 20:00 PM
  • HELLO
    flavian77 | Feb 24, 2021, 20:09 PM
  • do you code covers the 6 questions?
    flavian77 | Feb 24, 2021, 20:15 PM
  • my code is for question number 6 - the covidtracker question.
    User_35055 | Feb 24, 2021, 21:30 PM
  • the pdf has 6 questions. questions 4,5,6 are coding questions. I have completed 4 and 5 so I only need help with QUESTION 6 which is called covidtracker
    User_35055 | Feb 24, 2021, 21:31 PM
  • okay, am working on question 6. thank you for the clarification
    flavian77 | Feb 24, 2021, 21:33 PM
  • thank you
    User_35055 | Feb 24, 2021, 21:36 PM
  • hi, just checking in to see if the work is on track and that you will be able to deliver it to me by tomorrow
    User_35055 | Feb 25, 2021, 18:42 PM
  • hi to, thank you for checking, am almost, before then i will have submitted the task, how many hours from now do i have?
    flavian77 | Feb 25, 2021, 18:44 PM
  • you have a day left so a solid 24 hours! hope that is enough
    User_35055 | Feb 25, 2021, 18:46 PM
  • absolutely
    flavian77 | Feb 25, 2021, 18:47 PM
  • perfect, thank you so so much! I really appreciate your help and am looking forward to getting help with future projects as well if you will be willing to help me again
    User_35055 | Feb 25, 2021, 18:48 PM
  • sure, am always available for you
    flavian77 | Feb 25, 2021, 18:49 PM
  • hello, are you there? check the upload, and get a look at the work,
    flavian77 | Feb 25, 2021, 20:28 PM
  • hi, just a quick question. what assembly language did you do this in? it doesn't look like MIPS
    User_35055 | Feb 25, 2021, 21:10 PM
  • I also tried running it and did not get the correct output
    User_35055 | Feb 25, 2021, 21:19 PM
  • I used decoded C program to create the syscall for the MPIS program
    flavian77 | Feb 25, 2021, 21:20 PM
  • I have uploaded a screenshot of the output that I am getting with the code you have given me
    User_35055 | Feb 25, 2021, 21:22 PM
  • am I supposed to include everything before the .main in my code as well?
    User_35055 | Feb 25, 2021, 21:24 PM
  • from my side you can see the result i uploaded, check,
    flavian77 | Feb 25, 2021, 21:26 PM
  • i created a c program, compiled it into assembly.. that's what I did..
    flavian77 | Feb 25, 2021, 21:27 PM
  • could you upload the result with the input from my original (with the instructions) and see if you get the correct output
    User_35055 | Feb 25, 2021, 21:30 PM
  • let me see
    flavian77 | Feb 25, 2021, 21:31 PM
  • I created the c file to accept input, and print the results, then break the program when DONE is input. Then debugged the program to create an assembly program in MIPS,
    flavian77 | Feb 25, 2021, 21:32 PM
  • because I am trying to run this code on my SPIM but it is not compiling
    User_35055 | Feb 25, 2021, 21:33 PM
  • yours could not even work, so I did from the scratch
    flavian77 | Feb 25, 2021, 21:35 PM
  • Kindly try using MIPS compiler
    flavian77 | Feb 25, 2021, 21:35 PM
  • I have to use the SPIM compiler because that is what the project instructions are so I cannot use a MIPS compiler
    User_35055 | Feb 25, 2021, 21:36 PM
  • please you have to help me, my project is due tomorrow and I will not have anything to upload if this does not work
    User_35055 | Feb 25, 2021, 21:41 PM
  • I do not think the code that you have written is in MIPS because calls such as ldr are not part of MIPS code and we have been taught to use $ ti indicate registers which is not present in your code either
    User_35055 | Feb 25, 2021, 21:43 PM
  • can you see anything maybe I should correct it?
    flavian77 | Feb 25, 2021, 21:45 PM
  • I have uploaded the code I wrote for question 4. it is in MIPS code. I dont know exactly what you have to correct but the operations that I used in code for question 4 are the correct operations
    User_35055 | Feb 25, 2021, 21:47 PM
  • are you there?
    User_35055 | Feb 25, 2021, 21:53 PM
  • yes am looking at that you have uploaded
    flavian77 | Feb 25, 2021, 21:54 PM
  • im still gettinmg simmilar errors even when running this file
    flavian77 | Feb 25, 2021, 21:57 PM
  • check what am getting, i have uploaded ,with that u have sent
    flavian77 | Feb 25, 2021, 21:57 PM
  • what are you running your file on?
    User_35055 | Feb 25, 2021, 21:57 PM
  • the problem is, the code that you have written is not in MIPS language which is why it is not working for me and when you are trying to run my code, you are getting errors because you are not running it on a MIPS compiler
    User_35055 | Feb 25, 2021, 21:58 PM
  • MIPS
    flavian77 | Feb 25, 2021, 21:59 PM
  • I have run this code through a test kit and am getting all pass test cases so I am sure that this is correct
    User_35055 | Feb 25, 2021, 22:01 PM
  • the one you have uploaded?
    flavian77 | Feb 25, 2021, 22:08 PM
  • the one that I uploaded right now. it is called squares.s
    User_35055 | Feb 25, 2021, 22:10 PM
  • which language did you use to write the code u were saying needs to be corrected for errors????
    flavian77 | Feb 25, 2021, 22:11 PM
  • That is also in MIPS
    User_35055 | Feb 25, 2021, 22:14 PM
  • will you mind trying on MIPS compiler?
    flavian77 | Feb 25, 2021, 22:23 PM
  • trying the code that you sent on a MIPS compiler? I dont have a MIPS compiler though. The only compiler I use is SPIM
    User_35055 | Feb 25, 2021, 22:24 PM
  • im really sorry but I am going to assign this work to someone else. I have a deadline that is tomorrow and I cannot be late with my submission. the code that you have written is not in MIPS and is not running on my SPIM compiler and it is difficult to communicate through messages to figure out the problem. Im really really very sorry
    User_35055 | Feb 25, 2021, 22:27 PM
  • i have sent my result after runing the code?
    flavian77 | Feb 25, 2021, 22:29 PM
  • but the code that you have sent is not in MIPS, it is in another language and my assignment clearly says writing in MIPS
    User_35055 | Feb 25, 2021, 22:34 PM
  • 6) [50] Write a MIPS program called covidtracker.s that is similar to the C program you wrote in Homework #1. which was the project
    flavian77 | Feb 25, 2021, 22:38 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[3] $}

{$ showNewChatSuccessMsg[3] $}
Unable to send Message: {$ showChatProcessErrorMsg[3] $}
 
 
WritingPartner 5 years ago
Rated 9.31 earned 24940.11 around 808 assignments.
Hello dear friend, I'm happy to help you. I would like to express my interest in doing your assignment. I will go through your summary and instruction carefully and do your task. I promise to commit my skills and the great experience to guarantee you a top-notch quality paper, with zero grammatical errors, and a 100% free from PLAGIARISM. Besides my skill and experience, I respond promptly to my client and provide a quick turnaround. Kindly hire me, and I’ll make you proud. I’m looking forward to working with you. Thank you!
$215.00
  • Hi, will you be able to help me? I need this done by Friday morning
    User_35055 | Feb 24, 2021, 17:49 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[4] $}

{$ showNewChatSuccessMsg[4] $}
Unable to send Message: {$ showChatProcessErrorMsg[4] $}
 
 
bestwriter 5 years ago
Rated 9.51 earned 8477.76 around 324 assignments.
Hello client, please let me help you for an outstanding work. I will deliver a plagiarism free work on time, with correct grammar and with accurate answers arrived after strictly following instructions
$75.00
  • Hi, will you be able to help me? I need the work by friday morning latest
    User_35055 | Feb 24, 2021, 18:29 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[5] $}

{$ showNewChatSuccessMsg[5] $}
Unable to send Message: {$ showChatProcessErrorMsg[5] $}
 
 
Respectwriter 5 years ago
Rated 9.03 earned 26253.25 around 814 assignments.
I am well experienced and dependable tutor in your field of study who will always give you quality work that is FREE FROM GRAMMATICAL ERRORS and PLAGIARISM. I am online and ready to start working on your assignment right away.
$105.00
  • Hi, will you be able to help me? I need this done by Friday morning
    User_35055 | Feb 24, 2021, 17:49 PM
  • With a different price
    Respectwriter | Feb 24, 2021, 17:50 PM
  • I have already written all of the code, I only need you to fix the errors because I am unable to do so. I am a student so I dont have a lot of money to offer. I also dont think this task will be a lot of work. $105 Is too much
    User_35055 | Feb 24, 2021, 18:16 PM
  • That is hell of a work. If I were the one who had written the code is so easy to debug but now .. the best person to correct is yoi
    Respectwriter | Feb 24, 2021, 18:23 PM
  • Okay then how much would you charge to write the code from scratch?
    User_35055 | Feb 24, 2021, 18:29 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[6] $}

{$ showNewChatSuccessMsg[6] $}
Unable to send Message: {$ showChatProcessErrorMsg[6] $}
 
 
paulk 5 years ago
Rated 9.77 earned 9672.34 around 332 assignments.
Hello dear, allow me to help you out. Thanks
$75.00
  • Hi, will you be able to help me? I need this done by Friday morning
    User_35055 | Feb 24, 2021, 17:49 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[7] $}

{$ showNewChatSuccessMsg[7] $}
Unable to send Message: {$ showChatProcessErrorMsg[7] $}
 
 
drjim 5 years ago
Rated 9.55 earned 24203.41 around 648 assignments.
Hello! I can work on this task asap. I can also help you with your whole class at a discount!
$115.00
  • Hi, will you be able to help me? I need this done by Friday morning
    User_35055 | Feb 24, 2021, 17:49 PM
  • Yes
    drjim | Feb 24, 2021, 17:51 PM
  • I cannot pay $115 for this though. All my code is already written, I just need you to fix a couple of the errors.
    User_35055 | Feb 24, 2021, 18:15 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[8] $}

{$ showNewChatSuccessMsg[8] $}
Unable to send Message: {$ showChatProcessErrorMsg[8] $}
 
 
mutungamatee1 5 years ago
Rated 9.86 earned 38433.87 around 1268 assignments.
Hello, I am certain I can perfectly handle your assignment because I am an expert tutor in this discipline. Kindly hire me for the best results.
$200.00
  • When do you want it completed?
    mutungamatee1 | Feb 24, 2021, 18:31 PM
  • {$ item.message_content $}
    {$ item.sender_username $} | {$ item.date_entered $}

{$ chatErrMsg[9] $}

{$ showNewChatSuccessMsg[9] $}
Unable to send Message: {$ showChatProcessErrorMsg[9] $}